Product Model : | ZCT100BL-V1-LP |
Measuring Range : | ±90 ° |
Output : | Voltage |
Power: | Voltage(5V) |
Measuring Axis : | Single Axis |
Accuracy : | 0.1 °-0.5° |
Resolution : | 0.5 ° |
Application : | Solar Tracker |
Temperature : | -40℃ ~ +85℃ |
ZCT100BL-V1-LP is a one-axis low cost tilt sensor which is researched and produced by Shanghai Zhichuan Electronic Tech Co.,Ltd. The product is in one axis structure, install in vertical.The inner sensor is MEMSIC device.It adopt completely digital design of micro process control technology,add proper ASIC circuit,finally get analog voltage output.
Technical datas:
Item | Parameter | Unit | Remark |
Measuring range(1 | 0 ~ 90 | degree | |
Output voltage range | 0.5~4.5 | V | |
Output voltage resolution | 5 | mV | Testing temperature 25±4℃ |
Output voltage accuracy(2 | 20 | mV | Testing temperature 25±4℃ |
Output impedance | 2K | Ω | |
Response frequency | 2 | Hz | |
Operating voltage(3 | 5V±0.1V | V(DC) | |
Static operating current | <30 | mA | |
Operating temperature | -20~60 | ℃ | |
Storage temperature | -40~+85 | ℃ | |
Output wire length | ≥50 | cm |
Note 1:Please keep the mounting surface vertical to horizontal as possible as you can. Otherwise, the angle you measured will be a little smaller than actual angle.
Note 2:voltage output accuracy means Root Mean Square Value of measured error for several times (≥16 times) during measuring range.Measured error means the difference between measured value and noinal value.
Note 3: Please keep the stability of input voltage as possible as you can,because it will influence
the product’s voltage output accuracy.
Note 4: Rotate the device as arrow direction,the angle will be increased.If over the measuring range,then it will output max or min voltage.
Note 5:The formula of output voltage and angle is as follows;
Vout = 0.5V +(Angle)×4 / 90 V
Angle is angle value , range is 0.0°~+90.0°
Installing size and connection definition
Connection definition:
Red ————–5V
Black ————– 0V
Yellow ————–output voltage