ZCT330E-SWP-N-YK is a wireless MEMS tilt sensor working with the NB-IoT standard. It is with a maximum measurement range of two-axis (+-30 degrees). It can be widely used in various structural health monitoring, IoT scenarios, telecom, thermal, water, power and other industries. 

Features

All industrial devices are stable and reliable. Extremely low power consumption.

Applications

Safety control, monitoring, alarm, IoT

Technical parameters（room environment（25℃））

1. work parameter:

Note1: The annual battery self‐discharge rate is less than 3% if stocked in this temperature for a year. The self‐discharge rate will be higher than this value if beyond this temperature range.

2. performance parameter （room environment（25℃） ）

Note 1: Resolution refers to the minimum variance that can be detected by the sensor while working in its valid range.

Note 2: In the relative measurement mode, no alarm, heartbeat rate 1 time / day and ambient temperature 25 ° C.

Mount step:

       a. Install the SIM card;

b. Install the sensor horizontally on the object to be measured, remove the magnet on the side of the sensor to power on the sensor;

c. After 40 seconds, you can see a frame of heartbeat data on the default server platform, and the installation is successful.

Size, measuring direction and mount diagram: 

Remark: No SIM card is included by default.

Measurement Directions

Order Information:  

      ZCT330E‐SWP‐N‐YK     Internal antenna

ZCT330E1‐SWP‐N‐YK    External antenna