| Product Model ： | ZCT245J-LCS-E3-145 |
| Measuring Range ： | ±45 ° |
| Output ： | CAN |
| Power： | Voltage(8～30V) |
| Measuring Axis ： | Dual Axis |
| Accuracy ： | 0.1 °-0.5° |
| Resolution ： | 0.1 ° |
| Application ： | Machinery |
| IP Degree ： | IP65 |
| Temperature ： | -40℃ ~ +85℃ |
Ⅰ. General description
ZCT245J-LCS-E3-145 dual-axis tilt sensor is designed and produced by ZC SENSOR. Measuring range:± 45°, CAN communication.
Ⅱ. Features
Industrial devices entirely
Stable and reliable performance
cast-aluminum housing
with IP65 protection grade
Wide power supply
reverse power protection
Ⅲ. Application
Angle test
Safe control, monitoring, alarm
Standard control, bend control
Tilt attitude recorder
Ⅳ.Technical specification:(unless special mark, the following data are typical value in-room environment 25℃)
| Item | Test condition | min. | typ | max | unit | |
| Operation
parameter |
Supply voltage | DC | 8 | 12 | 30 | V |
| Quiescent current | VCC=12.00V | 50 | 60 | mA | ||
| Working temperature | -40 | +85 | ℃ | |||
| Performance
parameter |
Test range | Dual-axis | ±45 | degree | ||
| resolution(1 | 0.1 | degree | ||||
| accuracy(2 | ±0.5 | degree | ||||
| repeatability | ±0.2 | degree | ||||
| Zero temperature drift(3 | -40— +85℃ | 0.5 | 0.86 | degree | ||
| Response time(4 | 100 | ms | ||||
| Other
parameter |
Storage temperature | －45 | +125 | ℃ | ||
| Protection | IP65 |
Remark 1:
Resolution means the smallest variation of measuring device which can be detected by the sensor during the measuring range.
Remark 2:
Accuracy means the difference between the displayed value of the sensor and the true value.
Remark 3:
zero temperature drift means when the output is 0º under the room environment,
the offset of the angle when change temperature.
Remark 4:
Response time means the required time for sensor output rising to 85% of the output, which is caused by a step change of the measured angle.
Ⅴ. CAN communication protocol
Pls see the product datasheet
Ⅵ. Wire installation and pin definition:
In order to get the biggest range of angle variation, the sensor should be installed horizontally when the carrier or platform is normal.
Wire connection：
PIN1 ―――― NC PIN2 ―――― VCC power supply
PIN3 ―――― GND PIN4 ―――― CAN_H PIN5 ―――― CAN_L
Outside dimension ：
Ⅶ. Installation attentions:
Order information:
Optional component-plate: AZB-03;
Countersunk head screw: M4*12;
