Product Model : | ZCT1360J-LCS-E3-145 |
Measuring Range : | 0~360 ° |
Output : | CAN |
Power: | Voltage(8~30V) |
Measuring Axis : | Single Axis |
Accuracy : | 0.1 °-0.5° |
Application : | Machinery |
IP Degree : | IP65 |
ZCT1360J-LCS-E3-145 is a highly accurate and stable single-axis tilt sensor which is developed and manufactured by Shanghai Zhichuan Electronic Tech. Co., LTD. Measurement range is 360 degrees. CAN bus communication.
Features
High accuracy, High cost-effective
High stability, High reliability
Aluminum housing, IP65
Wide range power supply
Power reverse connection protection
Applications
Angle measurement
Safety control, monitoring and alarm
Real-time tilt angle record
Construction machinery
Parameters
Unless otherwise specified, the following are typical values at room temperature (25 ℃).
Item | Condition | MIN | Typical | MAX | Unit | |
Operation parameters | Power supply | DC | 8 | 12 | 30 | V |
Quiescent current | VCC=12.00V | 50 | 60 | mA | ||
Working temperature | -40 | +85 | ℃ | |||
Performance parameters | Measurement range | Single-axis | 360 | Degree | ||
Resolution(1 | 0.1 | Degree | ||||
Accuracy(2 | ±0.5 | Degree | ||||
Repeatability | ±0.2 | Degree | ||||
Zero temperature drift(3 | -40℃ to +85℃ | 0.5 | 0.86 | Degree | ||
Response time(4 | 100 | ms | ||||
Others | Storage temperature | -45 | +125 | ℃ | ||
IP level | IP65 |
Notes:
- Resolution means the minimum change that the sensor can detect in the measurement range.
- Accuracy means the difference between the measured result and the true value being measured.
- Zero temperature drift means when the output angle is fixed zero at room temperature, the angle offset changes along with temperature change.
- Response time means how long time it takes that the output of the tilt sensor reaches 85% of the changed angle value.
Wire connection and dimension (unit: mm)
Wire connection definition:
PIN definition (5 pins M12 male connector):
- PIN1 ―――― NC
- PIN2 ―――― VCC
- PIN3 ――――GND
- PIN4 ―――― CAN_H
- PIN5 ―――― CAN_L
Dimension without mounting plate:
Dimension with mounting plate:
Installation and measurement direction
The tilt sensor should be installed vertically to increase the accuracy of the measurement.
Order info
The required cable length should be declared on the PO.